Asus P5M2 User Manual Download Page 125

Page: 125 / 189

5-1

Chapter 5: RAID configuration

5.2.3 Adding or viewing a RAID configuration

You can add a new RAID configuration or view an existing configuration using the

View/Add Configuration command.

Adding a new RAID configuration

To add a new RAID configuration:

1. From the

Management Menu

, highlight

Configure

, then press <Enter>.

2. Use the arrow keys to select

View/Add Configuration

, then press <Enter>.

3. The

ARRAY SELECTION MENU

displays the available drives connected to

the SATA ports. Select the drive(s) you want to include in the RAID set, then

press <SpaceBar>. When selected, the drive indicator changes from

READY

ONLIN A[X]-[Y]

, where X is the array number, and Y is the drive number.

The information of the selected hard disk drive displays at the bottom of the

screen.

Summary of Contents for P5M2






























































































































































































Search results

Summary of Contents for P5M2

Reviews:

Asus P5M2, User Manual, Page: 125 / 189

Search results

Summary of Contents for P5M2

Reviews: