manualshive.com logo in svg

Asus P5M2, User Manual, Page: 114 / 189

Share
Download
Asus P5M2 User Manual Download Page 114

ASUS P5M2 Series

5-

3.  The utility main window appears. Use the arrow keys to select an option 

from the 

Management Menu

, then press <Enter>. Refer to the Management 

Menu descriptions on the next page.

 

At the bottom of the screen is the legend box. The keys on the legend box 

allow you to navigate through the setup menu options or execute commands. 

The keys on the legend box vary according to the menu level.

5.2 

LSI Logic Embedded SATA RAID Setup 

Utility (P5M2 model only)

The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0 

and RAID 1 set(s) from SATA hard disk drives supported by the motherboard 

ICH7R Southbridge chip.
To enter the LSI Logic Embedded SATA RAID Setup Utility:

1.  Turn on the system after installing all the SATA hard disk drives.

2.  During POST, the LSI Logic Embedded SATA RAID Setup Utility 

automatically detects the installed SATA hard disk drives and displays any 

existing RAID set(s). Press <Ctrl> + <M> to enter the utility.

The LSI Logic Embedded SATA RAID auto configures to RAID 1 when the SATA 

to RAID Mode is enabled.

Summary of Contents for P5M2






























































































































































































Reviews:

No comments