Asus P5M2 User Manual Download Page 137

Page: 137 / 189

5-2

Chapter 5: RAID configuration

6. Use the up/down arrow key to select the stripe size for the RAID 0 array, then

press <Enter>. The available stripe size values range from 4 KB to 128 KB.

The default stripe size is 128 KB.

A lower stripe size is recommended for server systems. A higher stripe size

is recommended for multimedia computer systems used mainly for audio and

video editing.

7. Highlight the

Capacity

item, enter the desired RAID volume capacity, then

press <Enter>. The default value indicates the maximum allowed capacity.

8. When the

Create Volume

item is highlighted, press <Enter>.

A warning message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu, or <N> to

go back to the Create Array menu.

Summary of Contents for P5M2






























































































































































































Search results

Summary of Contents for P5M2

Reviews:

Asus P5M2, User Manual, Page: 137 / 189

Search results

Summary of Contents for P5M2

Reviews: