manualshive.com logo in svg

Asus P5M2, User Manual, Page: 178 / 189

Share
Download
Asus P5M2 User Manual Download Page 178

ASUS P5M2 Series

-15

6.2.2  Red Hat

®

 Enterprise Linux

Follow these instructions when installing the Broadcom

®

 Gigabit LAN controller 

base driver for the Red Hat

®

 Enterprise Linux operating system.

Building the driver from the TAR file

Install first the Kernel Development tools before building the driver from the TAR 

file:

To install the kernel development application:

1.  Insert the Linux OS installation CD disk1 to the optical drive.

2.  Double click 

Application > System setting > Add/Remove application

.

3.  Select 

Kernel Development

 from the development tools.

4.  Follow the instructions on the screen to finish installation.

To build the driver from the TAR file:

1.  Create a directory and extract the TAR files:

 

tar xvzf tq3-<version>.tar.gz

2.  Build the driver bcm5700.o as a loadable module for the running kernel: 

 

cd tg3-<version>/src 

  make

3.  Test the driver by loading it: 

 

insmod tg3.o or (on 2.6 x Kernels)insmod tg3.ko

4.  Install the driver and man page: 

 

make install

5.  Refer to Red Hat distribution documentation to configure the network protocol 

and address.

The Broadcom LAN driver for Linux OS is located in: \Drivers\BCM5721 LAN\

B57BCMCD_SV_943\Linux\Driver.

Summary of Contents for P5M2






























































































































































































Reviews:

No comments