
5-
Chapter 5: RAID configuration
3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
4. The
Adapter Properties
screen appears.
Use the arrow keys to select
RAID Properties
, then press <Enter>.
The numbers of the channel depend on the controller.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter
SAS1068
PCI Slot
00
PCI Address(Bus/Dev/Func)
05.03.00
MPT Firmware Revision
1.15.00.00.IR
SAS Address
500E0180:60831008
NVIDIA Version
25.02
Status
Disabled
Boot
Order 0
Boot Support
Enabled OS only
RAID Properties
SAS Topology
Advanced Adapter Properties
5. The Select New Array Type screen apprears.
Use the arrow keys to select Create IM Volume, then press <Enter>.
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List
Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot
SAS1068
05 03 00 00 1.15.00.00-IR Disabled
0
Summary of Contents for P5M2
