Asus P5M2 User Manual Download Page 177

Page: 177 / 189

-1

Chapter 6: Driver installation

6.2

LAN driver installation

This section provides instructions on how to install the Broadcom

Gigabit LAN

controller drivers.

6.2.1 Windows

2000/2003 Server

To install the Broadcom

Gigabit LAN controller driver on a

Windows

2000/2003 Server OS:

1. Restart the computer, then log on with

Administrator

privileges.

2. Insert the motherboard/system support CD to the optical drive. The CD

automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

• Windows

automatically detects the LAN controllers and displays a New

Hardware Found window. Click

Cancel

to close this window.

• If Autorun is NOT enabled in your computer, browse the contents of the

support CD to locate the file

ASSETUP.EXE

from the BIN folder. Double-

click the

ASSETUP.EXE

to run the CD.

3. Click the

Broadcom 5721 Driver

option to begin installation.

4. Click

Next

when the InstallShield Wizard window appears. Follow screen

instructions to continue installation.

Summary of Contents for P5M2






























































































































































































Search results

Summary of Contents for P5M2

Reviews:

Asus P5M2, User Manual, Page: 177 / 189

Search results

Summary of Contents for P5M2

Reviews: