manualshive.com logo in svg

Asus P5M2, User Manual, Page: 171 / 189

Share
Download
Asus P5M2 User Manual Download Page 171

-

Chapter 6: Driver installation

8.  Insert the RAID driver disk you created earlier to the floppy disk drive.

9.  Select the option “

Search for a suitable driver for my device 

(recommended)

”, then click Next.

10.  The wizard searches the RAID controller drivers. When found, click 

Next

 to 

install the drivers.

11.  Click 

Finish

 after the driver 

installation is done.

To verify the RAID controller driver installation:

1.  Right-click the 

My Computer

 icon on the Windows

®

 desktop , then select 

Properties

 from the menu.

2.  Click the 

Hardware

 tab, then click the 

Device Manager

 button.

3.  Click the “+” sign before the item 

SAS and RAID controllers

. For example 

the 

LSI Logic Embedded SATA RAID

 or 

LSI SAS1068 SAS Driver

 items 

should appear.

4.  Right-click the RAID controller driver item, then select Properties from the 

menu.

5.  Click the Driver tab, then click the Driver Details button to display the RAID 

controller drivers.

6.  Click OK

 when finished.

Summary of Contents for P5M2






























































































































































































Reviews:

No comments