manualshive.com logo in svg

Asus P5M2, User Manual, Page: 182 / 189

Share
Download
Asus P5M2 User Manual Download Page 182

ASUS P5M2 Series

-1

6.4 

Management applications and 

 

utilities installation

The support CD that came with the motherboard package contains the drivers, 

management applications, and utilities that you can install to avail all  motherboard 

features.

The contents of the support CD are subject to change at any time without 

notice. Visit the ASUS website (www.asus.com) for updates.

6.4.1  Running the support CD

Place the support CD to the optical drive. The CD automatically displays the 

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support 

CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the 

ASSETUP.EXE

 to run the CD.

6.4.2  Drivers menu

The Drivers menu shows the available device drivers if the system detects installed 

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system 

versions.

Summary of Contents for P5M2






























































































































































































Reviews:

No comments