Asus P5M2 User Manual Download Page 165

Page: 165 / 189

-2

Chapter 6: Driver installation

Windows

2000/2003 Server

To create a RAID driver disk in Windows

2000/2003 Server environment:

1. Restart the system from the hard disk drive, then place the system/

motherboard support CD in the optical drive.

2. Browse the contents of the support CD to locate the driver disk utility. The

Windows 32-bit OS RAID driver disk for the Intel

Matrix Storage Manager is

located in:

\Drivers\ICH7R Intel RAID\Driver\win32\F6flpy32.exe

The Windows 2003 64-bit OS RAID driver disk for the Intel

Matrix Storage

Manager is located in:

\Drivers\ICH7R Intel RAID\Driver\win64\F6flpy64.exe

The Windows 32-bit and 64-bit OS RAID driver disk for the LSI Logic

Embedded SATA RAID is located in:

\Drivers\ICH7R LSI RAID\Driver\makedisk\win32_64.exe

The Windows 32-bit OS RAID driver disk for the LSI1068 SAS is located in:

\Drivers\LSI 1068\Driver\makedisk\2k_2k3.exe

The Windows 2003 64-bit OS RAID driver disk for the LSI1068 SAS controller is

located in:

\Drivers\LSI 1068\Driver\makedisk\2k364.exe

3. Insert a formatted high-density floppy disk to the floppy disk drive.

4. Follow screen instructions to complete the process.

5. After creating a RAID driver disk, eject the floppy disk, then write-protect it to

prevent computer virus infection.

6. Place a blank, high-density floppy disk to the floppy disk drive, then select the

type of RAID driver disk you want to create by typing the number before the

option

7. Press <Enter>.
8. Follow screen instructions to create the driver disk.

Summary of Contents for P5M2






























































































































































































Search results

Summary of Contents for P5M2

Reviews:

Asus P5M2, User Manual, Page: 165 / 189

Search results

Summary of Contents for P5M2

Reviews: