manualshive.com logo in svg

Asus P5M2, User Manual, Page: 138 / 189

Share
Download
Asus P5M2 User Manual Download Page 138

ASUS P5M2 Series

5-2

5.3.2  Creating a RAID 1 set (Mirror)

To create a RAID 1 set:

1.  From the utility main menu, select 

1. Create RAID Volume

, then press 

<Enter>. This screen appears.

Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5

Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.

[

 

CREATE ARRAY MENU

 

]

[

 

DISK/VOLUME INFORMATION 

]

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and 

cannot contain special characters.

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume1

RAID1(Mirror)

Select Disks

N/A

0.0   GB

Create Volume

       [

↑↓

]-Select 

  [ESC]-Exit          [ENTER]-Select Menu

2.  Enter a name for the RAID 1 set, then press <Enter>.

3.  Highlight RAID Level

, press the up/down arrow key to select 

RAID 1 (Mirror)

, 

then press <Enter>.

4.  Follow steps 4 to 5 and 7 to 9 of the previous section to create the RAID 1 

set.

Summary of Contents for P5M2






























































































































































































Reviews:

No comments