manualshive.com logo in svg

Asus P5M2, User Manual, Page: 42 / 189

Share
Download
Asus P5M2 User Manual Download Page 42

2-20

Chapter 2: Hardware information

2.5.4  PCI/PCI-X slots

The PCI and PCI-X slots support cards 

such as a LAN card, SCSI card, USB 

card, and other cards that comply with 

PCI/PCI-X specifications. 

2.5.5  PCI Express x16 slot (x8 link)

The onboard PCI Express x16 slot 

provides the x8 link. It is designed for 

high performance add-on cards such as 

SCSI card, RAID card. 

PCI Express x16 slot

A PCI Express x16 graphic card inserted to the onboard PCI Express x16 slot 

may run only at x1 speed (Intel spec.). Make sure the installed PCI Express x16 

graphic card support the downgrade x1 speed before you make a purchase. 

PCI-X slots 

PCI slot 

• 

When installing an optional ZCR card for P5M2/SAS onboard LSI1068 SAS 

controller, install the card on PCI_X2 slot that is colored green. 

•  The optional ZCR Card for P5M2/SAS onboard LSI 1068 

SAS Controller is LSI MegaRAID SAS 8300XLP. For detailed 

specifications, refer to: 

 

http://www.lsilogic.com/storage_home/products_home/internal_raid/

megaraid_sas/megaraid_sas_8300xlp/index.html

Summary of Contents for P5M2






























































































































































































Reviews:

No comments