ASTRO WM-3209, Instruction Manual

Page: 74 / 254

62
CH ID
The input channel ID is displayed here. The ID displayed can be edited. For details, refer to “3.4.3 ID
SETTING.”
Level meter
The level of the embedded audio signals among the SDI input signals is displayed here.
Format information
The input channel format information is displayed here. See below for details.
• Input channel....................... SDI A1, SDI B1, COMPOSITE or Dual Link is displayed
here.
• Color space ......................... This is the unit’s color space setting.
F1 to F5 switches
The details of the F1 to F5 function indicators are displayed here. Different functions are selected in
different modes.
Input status information
The status information of the input signals and ON/OFF status of FREEZE are displayed here.
• NoSignal ............................. This indicates that no input signals have been input.
• PhaseError .......................... This indicates that the LinkB signal has not been input or that
there is a difference in the phases of the LinkA and LinkB
signals during dual link operation.
• FREEZE.............................. This indicates that the unit’s FREEZE function is being
executed.
Dual Link inputs are not supported in the phase comparison mode or
COMPARE1-5 modes. For the format information, if Dual Link is selected for
the input channel in any of these modes, the input format of the currently
selected channel (Owner_CH) will be displayed as Dual Link(A) and the input
format of the channel to be compared to (Another_CH) will be displayed as
Dual Link(B).
NOTE