ASTRO WM-3209, Instruction Manual

Page: 27 / 254

Chapter 3 Method of Operation
15
3.3.3 FREEZE Switch
Pressing the FREEZE switch once freezes the current image on the screen.
Pressing the FREEZE switch again updates the frozen image.
In the FREEZE status, FREEZE is displayed in blue on the screen.
3.3.4 U1 through U4 Switches
Activates the function assigned by switch assignment. (For details, see “3.4.13 SWITCH ASSIGN”.)
3.3.5 Preset Switch
Pressing the PRESET switch displays the Preset screen. Pressing the PRESET switch again makes
the Preset screen go away.
Data corresponding to Preset1 through Preset8 can be loaded or saved on the Preset screen.
Loading Preset1 through 8
Pressing the PRESET switch while in Preset mode displays LOAD_PRESET1 through 4 in the function
indicator. Pressing any of the F1 through F4 switches will load the corresponding Preset data (screen
and settings).
Saving Preset1 through 8
Pressing the PRESET switch in a mode other than Preset mode displays SAVE_PRESET1 through 4 in
the function indicator. Pressing any of the F1 through F4 switches saves the current screen and
settings as the corresponding Preset data.
For details, see “4.1 Preset Mode”.
3.3.6 MENU Switch
Pressing once displays the MENU screen. Pressing again makes the MENU screen go away.
The key lock status is established by holding down the menu switch, and no further operations can be
performed except for the releasing of the key lock which can be achieved by holding down the mode
switch and menu switch.
When the key lock status has been set, the "AUTO SAVE & KEY LOCK!!!" message is displayed. At
this time, the settings are saved in BOOT of the memory by the automatic save function provided by the
monitor. The automatic save function can be set to ON or OFF.
When the function is set to OFF, the "KEY LOCK!!!" message is displayed when the key lock status has
been set. At this time, the settings are not saved in BOOT of the memory. For details on the automatic
save function, refer to "3.4.16 HARDWARE SETTING."
Pressing a switch on the front panel during key lock displays “KEY_LOCK!!!” on the screen.
Holding down the MENU switch during key lock displays “KEY_UNLOCK!!!” on the screen.
Releases key lock. The LED on the front panel lights orange during key lock.
3.3.7 ESC Switch
Moves up one level if the MENU screen is being displayed. Functions are subject to the specifications
of each mode when the MENU screen is not being displayed.