ASTRO WM-3209, Instruction Manual

Page: 222 / 254

210
5.18 3D image parallax check
Three-dimensional image parallax can be checked in a simplified manner by selecting the
Overlap display function on the Overlap display in Compare Mode 1. This makes it easy to
adjust the camera height and angle during field operations.
Example: Inputting the right-eye image to SDI A1 and the left-eye image to SDI B1
右目用映像
(SDI_A1に入力)
コンペアモード１
Overlap表示
左目用映像
(SDI_B1に入力)
対象 3D撮影用カメラ WMモニタ
画面表示
When the parallax of 3D moving images is to be checked, select Dual Link for the input
channel. When Dual Link has been set, the combined images can be checked with no delay
between the two input signals.
Example: Setting Dual Link1 for the input channel, and inputting the right-eye image to SDI
A1 and the left-eye image to SDI B1
右目用映像
(SDI_A1に入力)
コンペアモード１
Overlap表示
左目用映像
(SDI_B1に入力)
対象 3D撮影用カメラ WMモニタ
画面表示
The images of the two input signals are overlapped and displayed on the Overlap
display in Compare Mode 1. For details, refer to "4.12 Compare mode 1."
NOTE
For details on how to set the input channel to Dual Link and the cautions to be
observed, refer to section “5.9 Concerning the Dual Link Input Settings.”
NOTE
Target
Camera used for
3D imaging
Right-eye image
(input to SDI A1)
Left -eye image
(input to SDI B1)
Compare Mode 1
Overlap image display
Waveform
monitor
Image display
Target
Camera used for
3D imaging
Right-eye image
(input to SDI A1)
Left -eye image
(input to SDI B1)
Compare Mode 1
Overlap image display
Waveform
monitor
Image display