ASTRO WM-3209, Instruction Manual

Page: 53 / 254

Chapter 3 Method of Operation
41
3.4.10 WAVE
Make waveform settings. Setting items are as follows.
Setting Item Description Default
Vanc ON: Display the V_ANC waveform using raw data.
OFF: Display the V_ANC waveform as black. OFF
H Blank ON: Display the H_Blank waveform using raw data.
OFF: Displays the H_Blank waveform as black. OFF
Scale
%: Displays scalar as a percent.
V: Displays scalar as mV.
Non: Does not display scalar.
%
Filter Non: Does not filter the waveform.
LPF: Applies a low-pass filter to the waveform.
Average: Displays the waveform by averaging the four
pixels before and after.
LPF
Skelton Non: Makes background of the mini-wave black.
HALF: Makes the background of the mini-wave half
transparent.
FULL: Makes the background of the mini-wave fully
transparent.
FULL
PtoP_LINE (*1) ON: Performs linear interpolation between two points
OFF: Does not perform linear interpolation
ON
*1: We recommend that the PtoP_LINE setting should be turned ON when checking a test pattern
waveform.
• Supplement
Vanc and H_Blank have the following relationship. Note the difference in both
expressions and the relationship of the regions.
Image Active Area H_Blank Area
Vanc Area
Image Active Area