ASTRO WM-3209, Instruction Manual

Page: 132 / 254

120
4.12.1 Compare Mode 1 Overlap Display
This mode displays the video image of the Owner CH superimposed on the video image of
Another CH.
The overlap display ratio of the Owner CH and Another CH images can be adjusted.
The Owner CH and Another CH images can be shown as anaglyph displays.
The difference in the brightness levels of the Owner CH and Another CH images can be
displayed.
・ Functions relating to Overlap, L&R, T&B, Anaglyph, Y-Differences, AREA and MAG
Setting item Description Default
Overlap/L&R/T&B/Checker
(*3)
Overlap: Changes the ratio at which the two inputs overlap.
L&R: Changes the horizontal ratio between the two inputs.
T&B: Changes the vertical ratio between the two inputs.
Checker ： change the size of checker pattern unit.
Overlap
Overlap/Anaglyph/
Y-Difference (*3)
Overlap: Changes the ratio at which the two inputs overlap.
Anaglyph: Displays anaglyph images.
Y-Differnce: Displays the difference in the brightness between
the two inputs.
Overlap
Marker (*4)
Marker: Displays Marker of the parallax in the left-eye and
right-eye images.
OFF
AREA (*1)
Enables the display area to move to the left, right, up or down at
the x2 or x4 setting.
MAG (*2) When HD signals are input:
x1: Displays the HD images with 960 x 540 pixels.
4:3: Displays the HD images with 1024 x 768 pixels.
SCOPE: Displays the HD images with 960 x 407 pixels.
x2: Cuts out a 1024 x 768 pixel area of the HD images, and
displays the images with 1024 x 768 pixels.
x4: Cuts out a 512 x 384 pixel area of the HD images, and
displays the images with 1024 x 768 pixels.
When SD signals are input:
x1: Displays the SD images with 720 x 540 pixels.
4:3: Displays the SD images with 1024 x 768 pixels.
16:9: Displays the SD images with 1024 x 576 pixels.
x2: Cuts out a 512 x 384 pixel area of the SD images, and
displays the images with 1024 x 768 pixels.
x4: Cuts out a 256 x 192 pixel area of the SD images, and
displays the images with 1024 x 768 pixels.
x1 when HD
signals are input
x1 when SD
signals are input
*1: The AREA item is displayed only when x2 or x4 has been selected as the MAG setting.
*2: For details on the image displays using the MAG function, refer to "5.6 Aspect ratios."
*3: Overlap/L&R/T&B/Checker is available when Overlap/Anaglyph/Y-Difference is set as Overlap.
*4: Push adjustment dial to switch the active marker to adjust (Left
→ Right → Left,Right → Left →… ), rotate
adjustment dial to adjust marker position.