ASTRO WM-3209, Instruction Manual

Page: 59 / 254

Chapter 3 Method of Operation
47
Overlay Pic ON: Displays the overlay video image.
OFF: Hides the overlay video image.
(However, this setting is enabled in modes other than
Picture mode.) “3.4.9 PICTURE”
function
OvPic Size Normal: The video image is overlaid at the same size as
the picture mode.
Small: The video image is overlaid with the right and
bottom reduced.
(However, this setting is enabled in modes other than
Picture mode.)
“3.4.9 PICTURE”
function
Reverse Scan
ON: Displays the screen with top-bottom reversed.
OFF: Displays the screen without reversing top-bottom. “3.4.7 DISPLAY”
function
Information ON: Displays the screen selected under Display.
OFF: Hides the screen selected under Display. “3.4.7 DISPLAY”
function
ID Text ON: Displays the Channel ID.
OFF: Hides the Channel ID. “3.4.7 DISPLAY”
function
Format ON: Displays the format information.*2
OFF: Hides the format information. “3.4.7 DISPLAY”
function
Time Code ON: Displays the time code.
OFF: Hides the time code. “3.4.7 DISPLAY”
function
Err Status
ON: Displays error information.
OFF: Hides error information.
“3.4.7 DISPLAY”
function
Audio ON: Displays the Audio Level Meter.
OFF: Hides the Audio Level Meter. “3.4.7 DISPLAY”
function
Battery (*3) ON: Displays the Battery Level Icon.
OFF: Does not display the Battery Level Icon. “3.4.7 DISPLAY”
function
VectorScale 100%: Displays a color bar 100% scale.
75%V: Displays a color bar 75% scale. “3.4.11 VECTOR”
function
Power Save (*2) ON: The low-power-consumption mode is established.
OFF: The low-power-consumption mode is released. “3.4.16 HARDWARE
SETTING” function
*1: For details on the dual link input signal setting method, refer to “5.9 Concerning the Dual Link Input
Settings.”
*2: For details on Power Save, refer to “5.17 Concerning the Low-Power-Consumption Mode.”
*3: This setting is not used by the WM-3209 or WM-3209-L model. Its specification is such that no
setting can be assigned even if the cursor is aligned with this item and the adjustment dial is
pressed.