ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 83 / 214

QLS-3000/2000 Xe Series 4-13
5 Press the SELECT key.
Web Alignment
Alignment is particularly important for overlapping color printing on the
QLS-3000 Xe.
Adjust Web Alignment to modify registration at each print station
individually. Adjust Print Offset to modify the alignment of all print
stations simultaneously.
To evaluate whether web alignment should be adjusted, print a Block Test.
To adjust web alignment:
1 Press the MENU key. Use the arrow keys to select Align from the menu
and then press the SELECT key.
2 In the ALIGN menu, use the arrow keys to select Cross-Web. Then press
the SELECT key.
Note: The printhead names will vary based on the printer model.
3 Press the up/down arrows to increase/decrease the value for the selected
printhead. Press the left/right arrows to select a different printhead. The
arrow on the display will indicate the direction of movement.
4 Print a Test Pattern to check adjustments and continue making
adjustments until the blocks in the test pattern are horizontally and
vertically aligned.
(ALIGN) Down-Web > Cross-Web
Front: 0 Bottom: 0 Rear: 0
| Intensity | Print | Memory | Mode |
| >
Align | Media | Comm | System |