ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 76 / 214

4-6 Printing
continuously run the pattern, select the infinity symbol. Press the
SELECT key.
5 Select Yes when prompted to overwrite memory with the test pattern
and perform the test. This will cause anything else in memory to be
erased.
6 Press the PRINT/PAUSE key to print the test pattern. The printer will
immediately print the number of patterns specified. If infinity was
selected as a quantity, pause the printer and press the CANCEL key to
cancel the batch and clear memory.
To evaluate whether web alignment should be adjusted, print a Block Test.
To print a block test pattern:
1 Press the MENU key. Use the arrow keys to select Align from the menu
and then press the SELECT key.
2 Set the Down-Web and Cross-Web setting for each printhead to 0.
Note: The printhead names will vary based on the printer model.
•
Select Down-Web and press the SELECT key. Press the up/down
arrows to increase/decrease the value for the selected printhead to 0.
Press the left/right arrows to select a different printhead. Set the
down-web value for each printhead to 0.
•
Select Cross-Web and press the SELECT key. Press the up/down
arrows to increase/decrease the value for the selected printhead to 0.
Press the left/right arrows to select a different printhead. Set the
cross-web value for each printhead to 0.
Press the MENU key to return to the menu.
(ALIGN) > Down-Web Cross-Web
Front: 0 Bottom: 0 Rear: 0
| Intensity | Print | Memory | Mode |
| >
Align | Media | Comm | System |