ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 65 / 214

QLS-3000/2000 Xe Series 3-29
Prefix
Use the following instructions to modify the command prefix for host
commands received by the printer.
To select a command prefix:
1 Press the MENU key. Use the arrow keys to select Comm from the menu
and then press the SELECT key.
2 In the COMM menu, use the arrow keys to select Pref. Then press the
SELECT key.
3 Use the up/down arrow keys to select a command prefix. The default
command prefix is <SOH>.
4 Use the left/right arrow keys to select the Fmt Prefix option. Then use the
up/down arrow keys to select a format prefix. The default format prefix
is <STX>.
Press the SELECT key. A confirmation message will appear on the
display.
5 Use the left/right arrow keys to select YES, then press the SELECT key.
Change Comm parameters permanently?
>
NO YES
(COMM) Port | Hshk | Ptcl | > Pref | Delim
Cmd Prefix: = <SOH> | Fmt Prefix: = <STX>
| Intensity | Print | Memory | Mode |
| Align | Media
| > Comm | System |