ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 58 / 214

3-22 Keypad Controls and Menus
Image
If using label formatting software to create labels, the width and length of the
image area are set within the application. The Image menu in this case will
report these parameters as set, and will not require input.
To specify width and length of the image area:
1 Press the MENU key. Use the arrow keys to select Media from the menu
and then press the SELECT key.
2 In the MEDIA menu, use the arrow keys to select Image. Then press the
SELECT key.
3 If necessary, use the up/down arrow keys to adjust the label width.
4 If necessary, use the left/right arrow keys to select the Length option.
Then use the up/down arrow keys to adjust the label length.
(MEDIA) Type | > Image | Label | Offset
Image: Width = 038mm | Length = 0050mm
| Intensity | Print | Memory | Mode |
| Align | >
Media | Comm | System |