ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 62 / 214

3-26 Keypad Controls and Menus
Handshaking
If the Comm Port setting is RS-232, set Baud Rate and Handshaking to match
host workstation settings. The default baud rate is 19,200.
To set baud rate and handshaking method:
1 Press the MENU key. Use the arrow keys to select Comm from the menu
and then press the SELECT key.
2 In the COMM menu, use the arrow keys to select Port. Then press the
SELECT key.
Note: The Baud Rate option is available only when RS-232 is used. The
Parallel port does not use this option.
3 Use the left/right arrow keys to select the Baud Rate option.
Use the up/down arrow keys to select a baud rate. Then press the
SELECT key. A confirmation message will appear on the display.
4 Use the left/right arrow keys to select YES, then press the SELECT key.
Change Comm parameters permanently?
>
NO YES
(COMM) > Port | Hshk | Ptcl | Pref | Delim
Port: RS-232 | BAUD Rate: 19.2k
| Intensity | Print | Memory | Mode |
| Align | Media
| > Comm | System |
(COMM) > Port | Hshk | Ptcl | Pref | Delim
Port: RS-232 | > BAUD Rate: 19.2k