ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 52 / 214

3-16 Keypad Controls and Menus
Mode Menu
Cutter
If using an optional cutter or cutter/stacker accessory, you can enable it using
the Cutter menu option.
To enable/disable the cutter:
1 Press the MENU key. Use the arrow keys to select Mode from the menu
and then press the SELECT key.
2 In the MODE menu, use the arrow keys to select Cutter. Then press the
SELECT key.
3 Press the up/down arrow keys to enable/disable the cutter. If you are
enabling a cutter, choose Fabric or Paper/Tag to indicate the type of
cutter that will be used.
4 If necessary, press the left/right arrow keys to select the Cut Flag option.
Use the up/down arrow keys to enable/disable the cut flag.
The Cut Flag option inserts extra blank tags to demarcate or flag the end
of a batch.
When enabled, the printer will automatically insert one long and one
short blank tag between batches. The longer tag is approximately 10 mm
longer than the printed tag length. This extra length will allow you to
quickly identify separate batches. With the flag enabled, the minimum
tag length is 38 mm.
5 Press the MENU key to return to the menu.
(MODE) > Cutter | Mirror | TTR Sensor
Cutter Unit: Disabled Cut Flag:
Off
| Intensity | Print | Memory | > Mode |
| Align | Media | Comm | System |