ASTRO-MED QLS-2000XE SERIES, Operation & Setup Manual, Page: 36 / 214

2-22 Printer Setup
Label Length
Set label length for the longest label you will be printing to ensure memory is
not wasted on label area that is not used.
Maximum gap length in millimeters can also be specified. Default is 3 mm.
To specify maximum label media length:
1 Press the MENU key. Use the arrow keys to select Media from the menu
and then press the SELECT key.
2 In the MEDIA menu, use the arrow keys to select Image. Then press the
SELECT key.
3 Use the up/down arrow keys to adjust the maximum label length.
Max Length - Set this value to slightly more than the longest label
you will be printing. This setting allows the printer to use memory
more efficiently.
4 Use the left/right arrow keys to select the Max Gap option. Then use the
up/down arrow keys to adjust the maximum label gap.
Max Gap - Set this value to at least the size of the gap between
labels. This settings allows the printer to determine a media out
condition.
Note: The media will feed at least two times the Max Gap setting before
a media out error is reported.
5 Press the SELECT key.
(MEDIA) Type | Image | > Label | Offset
Label: Max Len = 0300mm | Max Gap = 03mm
| Intensity | Print | Memory | Mode |
| Align | >
Media | Comm | System |