SECTION 1 SAFETY PRECAUTIONS
______________________________________________________________________
1-5
The BIS VIEW Monitor should not be used adjacent to or stacked with other
equipment. If adjacent or stacked use is necessary, the BIS VIEW Monitor should be
observed to verify normal operation in the configuration in which it will be used.
To completely remove power from the unit: put the monitor in standby mode,
disconnect power cord from the power cord receptacle of the monitor, then remove
the battery from the monitor.
The BIS VIEW monitor may not power up entirely if battery power is low. If that
should occur, connect unit to wall power and press the Reset button. (Refer to
Section 6.4 “Using the Reset Button”).
Service or repairs must be performed only by qualified biomedical technicians.
Important:
The BIS VIEW systems comply with the European Medical Device Directive (MDD)
and applicable regulatory requirements of the country distributed to and carry the
CE
XXXX
Marking. Declarations of Conformity provided upon request where
appropriate.
