ASP T-Boss570, Owner'S/Operator'S Manual

Page: 62 / 111

Break-in period
Break-in period for this UTV is the first 30 hours of operation, or 3 months .
No single action on your part is as important as a proper break-in. Careful
break-in of new engine will result in more efficient performance and longer
engine life. Perform the following procedures carefully.
CAUTION
Do not operate at full throttle or high speeds for extended periods during the
break-in period. Excessive heat can build up and cause damage to precisely
machined engine parts.
1. Fill the fuel tank.
2. Check oil reservoir level indicated on dipstick. Add oil if necessary.
3. Drive slowly at first. Select an area which is open and will give you room to
familiarize yourself with vehicle operation and handling.
4. Do not operate at sustained idle.
5. Perform regular checks of fluid levels, controls and all important areas on
the vehicle as outlined on the Daily pre-ride inspection checklist
–
see
”4.Daily pre-ride inspection”.
6.
Don’t pull loads.
7. Change break-in oil and oil filter at 30 hours or 3 months.