ASP T-Boss570, Owner'S/Operator'S Manual

Page: 52 / 111

To Wear the Seat Belt properly do the following:
1. Hold the latch plate as you pull the belt across your lap and chest. Make
sure the belt is not twisted and is not caught on any portion of the vehicle, your
clothing, or any equipment you are carrying.
2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to
make sure it is secure.
3. Put the lap portion of the belt low on your hips. Push down on the buckle
end of the belt as you pull up on the shoulder part so the belt
is snug across your hips.
4. Position the shoulder belt over your shoulder and across your chest. The
shoulder belt should fit against your chest. If it is loose, pull the belt out all the
way and then let it retract.
To Release the Buckle
Firmly press the release button.
WARNING
POTENTIAL HAZARD
Not wearing the seat belt.
Wearing the seat belt improperly.
WHAT CAN HAPPEN
There is increased risk of being killed or seriously injured in an accident.
HOW TO AVOID THE HAZARD
Always wear your seat belt when riding in the vehicle.
Be sure the seat belt is close-fitting across your hips and chest and is latched
securely.
CAUTION
To protect from damage, do not put metal products, like tools or sharply edged
products directly in the glove compartment. If they must be stored, wrap them
in appropriate cushion material.