ASP T-Boss570, Owner'S/Operator'S Manual

Page: 77 / 111

CAUTION
If electrolyte spills (from we
t or “flooded” batteries), immediately wash it off
with automotive contact cleaner such as Maxima Electrical Contact/Brake
Cleaner to prevent damage to the UTV.
WARNING
Protect the battery terminals from corrosion. If cleaning is necessary, clean
terminals with a soft wire brush and then spray them with automotive contact
cleaner such as Maxima Electrical Contact/Brake Cleaner. Finally, coat the
battery terminals with dielectric grease.
Battery mounting and connecting
1. Insert the battery into the holder.
2. First connect and tighten the red (positive) cable.
3. Then connect and tighten the black (negative) cable.
4. Reinstall battery cover and attach the hold down strap.
5. Check if cables are properly routed.
NOTE:
Power plug leads may need to be bent down so that battery cover may
be installed.
When your UTV is placed in storage for one month or more, the battery should
be removed, fully charged and stored in a cool dry place. Before operation,
take the battery to your dealer for testing and recharging.
When installing a new battery, make sure it is fully charged prior to its initial
use. Using a new battery that has not been fully charged can damage the
battery resulting in a shorter battery life. It can also hinder vehicle
performance.
CAUTION
EPS models (with Power Steering) are equipped with a 30Ah battery. This
may not be sufficient to provide power for optional accessories. When
installing optional accessories, please upgrade your battery if necessary. See
your dealer for the proper battery.