ASP T-Boss570, Owner'S/Operator'S Manual

Page: 60 / 111

HOW TO AVOID THE HAZARD
When riding in cold weather, always make sure all control cables work
smoothly before you begin riding.
CAUTION
You must allow the engine to sufficiently warm up before operating, or engine
damage could result.
1. Apply the brake.
2. With the drive select lever shift the Neutral.
NOTE: When the drive select lever is in the neutral gear, the Gear Position
Indicator displays
“N” and the Neutral indicator light is on. If the Gear Position
indicator
does not display “N” or the Neutral Indicator light isn’t on, ask a
dealer to inspect the electric circuit.
Engine can be started only in the Neutral gear and when applying the brake.
3. With your foot off the accelerator pedal, start the engine by turning the key
into the
“ ” position.
NOTE: If the engine fails to start, release the key, and then try starting again.
Wait a few seconds before the next attempt. Each starting should be as short
as possible to preserve the battery. Do not start the engine more than 5
seconds on each attempt.
4. Warm the engine up until it runs smoothly.
Jump-starting
Jump-starting the vehicle should be avoided. Instead, the battery should be
removed and charged. However, if the vehicle must be jumpstarted, proceed
as follows.
1. Turn the key to “ ” position.