ASP T-Boss570, Owner'S/Operator'S Manual, Page: 40 / 111

NOTE: When shifting 2WD / 4WD, the mechanics in the front gearbox
maybe still be engaged / disengaged. The mechanics would finally
disengaged / engaged when rides on a hard surface or rides in reverse.
Do not switch on 4WD if the rear wheels are spinning. This may cause
severe machine damage. When switch on 4WD, the button will stay in
4WD position but 4WD mechanics maybe still disengaged. Always apply
throttle gently and let the wheels move slightly to allow the 4WD mechanics
finally engage. The 4WD indicator on the speedometer will come on when
4WD engaged.
2. Turn Signals Switch
4. Main Switch
Functions of the switch positions:
: All electrical circuits are on. Position lamps are on.
: All electrical circuits are off. The key can be removed
in this position.
: The electric starter is engaged by turning and holding the
key in this position. Release the key when the engine starts.
Do not operate the electric starter continuously for more than 5 seconds,
or starter damage could occur. Wait at least 5 seconds between each
operation of the electric starter to let it cool.
Do not turn the key to the “ ” position when the engine running,
or damage to the electric starter will result.