ASP T-Boss570, Owner'S/Operator'S Manual

Page: 41 / 111

5. Hi/ Lo Beam Switch
Turn on the high-beam headlight
Use caution and drive at reduced speeds in conditions of reduced visibility
such as fog, rain and dusk.
6. Rear Diff Lock Switch
When in 2WD, the switch can change rear diff lock or rear diff unlocked.
When in 4WD, the switch cannot work, the vehicle will stay rear diff lock.
9. 12V Accessory Socket
The accessory socket (1) is attached to the left
side of the front cover. You can use the
accessory socket to power a trouble light,
spotlight, CB radio, or cell phone etc.
Do not plug in any heat-generating accessory such as an car cigarette lighter
because it damages the socket.
To use the accessory socket, start the engine. Then turn the headlights OFF,
and open the accessory socket cap (2).
Be sure the engine is on and the headlights are turned off before using the
accessory socket, otherwise you may drain the battery.
The accessory socket is rated capacity is DC 12V, 120 W (10A) or less. If you
exceed this limit, you may blow a fuse.
When you are done using an accessory, unplug it, and cover the socket with
the cap.
Be careful not to flood this accessory socket when washing your UTV.