ASP T-Boss570, Owner'S/Operator'S Manual

Page: 18 / 111

WARNING
You must inspect your UTV each time before riding to ensure it is in proper
working order. If proper inspection is not done, severe injury or death could
result.
Use the following checklist to verify your machine is in proper working order
each time you ride.
ITEM/ INSPECTION PROCEDURE
1. Tires
— check condition and pressure.
2. Fuel tank
— checking for leaking, fill the fuel tank to the proper lever.
3. Brakes
— check fluid level, operation, adjustment (including parking brake).
● Brake pedal
Check for correct brake pedal free play. If the brake pedal free play is incorrect,
have an authorized dealer adjust it. Check the operation of the brake pedal. It
should move smoothly and there should be a firm feeling when the brakes are
applied. If not, have the vehicle inspected by your dealer.
● Brake fluid leakage
Check to see if any brake fluid is leaking out of the pipe joints or the brake fluid
reservoir. Apply the brakes firmly for one minute. If there is any leakage, have
the vehicle inspected by an authorized dealer.
Brake fluid level
● Check the brake fluid level.
Add fluid if necessary.
● Brake operation
Test the brakes at slow speed after starting out to make sure they are working
properly. If the brakes do not provide proper braking performance, inspect the
brake system.
4. Throttle/ Accelerator pedal
— check for free operation, closing and free
play. Check to see that the accelerator pedal operates correctly. It must
operate smoothly and fully spring back to the idle position when released.
Have an authorized dealer repair as necessary for proper operation.