ASI Triton Advanced Dental System 2025M Operation & Service Manual Download Page 6 | Manualshive

Page: 6 / 99

background image

ASI – The leader in Advanced Systems Integration | www.asimedical.net

TRiTOn

™

ADVAnceD DenTAl SySTeMS

®

2025M | 2025M/DV | 2025M/AR

6

65-2025M Rev. B

The system functions to operate dental handpieces and to serve as an integrated base for other dental devices and accessories.
Use of the system is intended only to support dental treatment and hygiene procedures, and operation of dental instruments by or
under the supervision of a licensed dentist. All model configurations include two fiber optic highspeed connections, one lowspeed
connection, air/water syringe, low pressure air-only syringe and water supply with two 1-Liter bottles.

The Triton

™

Series is available with different configurations for various deployable options.

• 2025M – Includes full standard 2025 self-contained system with the addition of the shipping case, handpiece bag

set, repair kit, upgrade to 4” locking casters and grounding strap. This model is for use with 120volt/60Hz only.

• 2025M/DV – Includes all features of 2025M above plus special HERM mounts on the air compressor and vacuum

pump for added durability during transport and with dual voltage power input capability. The dual voltage capability
allows the system to be operated either from a 120volt/60Hz input or 120volt/50Hz input.

• 2025M/AR – Includes all features of the 2025M/DV above, plus a power conditioner, KaVo electric motor

handpiece, piezo ultrasonic handpiece, Valo curing light and accessory handpieces as listed below and shown on
next page:

Part number Description

Qty

90-5138

KaVo E25L Contra Angle

4

90-5144

KaVo 68LH Latch Head

8

90-5147

KaVo 10LP Straight Attachment

2

90-5148

NSK NL9000s Highspeed Handpiece

4

90-5150

KaVo 181L Air Motor

4

90-5151

NSK NL10Ti 6-Pin Coupler

1

90-5282

KaVo 7LP attachment

4

Part number Description

Qty

90-5414/A

Satelec Ultrasonic Handpiece

4

90-5714

NSK Pana Spray

1

90-5714/N NSK Highspeed Nozzle

1

90-5715

KaVo Spray 6-Pack

1

90-5715/N KaVo Quick Nozzle

1

90-5715/N2 KaVo MULTIFlex Nozzle

1

2025M

Back

With Shipping Case

Repair Kit & Manual

Power Conditioner

«
...
4
5
6
7
8
...
»

Summary of Contents for Triton Advanced Dental System 2025M




































































































Reviews:

No comments

Related manuals for Triton Advanced Dental System 2025M

Brand: JB Systems Pages: 7

Brand: 3B SCIENTIFIC PHYSICS Pages: 36

Brand: 3A HEALTH CARE Pages: 16

Short/cut 2000 Audio Editor

Brand: 360 Systems Pages: 4

Brand: ACE INSTRUMENTS Pages: 15

Brand: Wave Fitness Pages: 15

Brand: Ace Pages: 17

Brand: ACE INSTRUMENTS Pages: 33

Brand: ACE INSTRUMENTS Pages: 2

Brand: ACE INSTRUMENTS Pages: 2

Brand: TapFlo Pages: 35

Brand: DANA Pages: 8

Brand: 2E Pages: 6

Brand: Bang & Olufsen Pages: 2

Brand: Raven Pages: 17

Brand: Campbell Pages: 12

Brand: ICELED Pages: 4

Brand: Facom Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands