Important information
– Before using remote message retrieval you must enter a new PIN code (refer to following
Section). No remote message retrieval is possible with the factory default PIN code 1234.
– At least one announcement must have been recorded and been assigned to an MSN.
– To simplify remote message retrieval record an individual ”Remote retrieval Help” (see Section:
”Recording Remote retrieval help”, Page 59).
– For remote message retrieval you must call an MSN to which a recording has been assigned.
– Your entries are acknowledged by signal tones:
– Correct input: short, high signal tone
– Incorrect input: long, low signal tone.
– During remote message retrieval all functions can be cancelled using the
key.
– Remote message retrieval is terminated by placing the handset on-hook.
Changing the PIN code for remote message retrieval
For your security it is necessary that you initially enter a new 4-position PIN code. No remote messa-
ge retrieval is possible with the factory default PIN code 1234.
G
The PIN code may
not
contain any digit 8.
KK
E
Enter the submenu
Settings/Miscellaneous/Change PIN
.
E
Enter the old PIN code (original PIN code set by the factory: 1234).
KK
E
Press the Display key at
ok
.
E
Enter the new 4-digit PIN code.
KK
E
Save.
G
If you have forgotten your PIN code you can set it back to the factory default setting 1234
(see Section: ”Service menu”, Page 49).
8
Remote message retrieval
62
