Positioning the telephone set
In view of the extensive range of surfacing materials used on furniture we cannot guarantee that
the base of the telephone set (e.g. the pads) will not cause marks. We therefore recommend that
you place the phone on a non-slip mat. It is preferable not to choose a location in direct proximity
of radio, TV and video equipment or close to sources of heat such as radiators.
Emergency operation
If the local 230 V mains supply fails, the ISDN connection is powered directly from the exchange.
However, the exchange supplies only sufficient power for one telephone set.
Important:
If several telephone sets are operated on the same ISDN connection, only one may be
authorized for emergency operation.
During emergency operation the display is switched off and telephone calls can only be made by
taking the handset off-hook. In addition the following functions are not available:
– Volume control
– LED
– Clock
– Alarm
– Telephone answering machine, message forwarding
– Call announcement, name announcements, message announcements (on the answering machine)
– Download
Switching on emergency operation
The switch for activating the emergency operation is located
under the telephone number label plastic cover.
E
Remove the plastic cover and label.
E
Press the emergency operation switch (1) until it locks.
E
Reinsert the label and cover.
Deactivating the emergency operation
E
Remove the label.
E
Push nipple (2) on the emergency operation switch to the side.
E
Reinsert the label and cover.
G
The telephone set which has been switched to emergency mode should be clearly identified
using a coloured sticker.
Installation and start-up
8
1
2
