If you want the number to be always dialled via a specific provider, you need to preselect the provi-
der at this point:
KK
E
Press the Display key repeatedly at
Prov.
until the desired provider is
displayed.
KK
E
Save.
G
You can only select pre-programmed providers (see ”Programming providers”, Page 34).
You do not have to create a complete card file all at once, it can be completed gradually.
You have the following possibilities:
– Setting up a new entry with information on a calling partner while the call is in progress.
E
Consecutively press the INFO key and the Display key for the displayed telephone number.
The remaining procedure is the same as for setting up a new entry (see Page 18).
– To set up a new card file entry from the LOG directory, the redial directory, or the caller list:
E
Press the INFO key followed by the Display key.
E
Press the Display key at
No. -
> card
.
The telephone number is transferred automatically into the new card file entry.
Add the name and optionally the address, etc., as described above.
Cleanup the card file
KK
E
Enter the submenu
Main menu/Card file
.
KK
E
Press the Display key at
Cleanup
.
You can now review the entries in alphabetical order and delete individual entries as desired.
To retrieve the previous or next entry or to delete the displayed entry:
KK
E
Press the corresponding Display key.
Return to the basic state:
E
Press the Escape key.
Basic settings
20
