Telephoning via different providers
Irrespective of your network provider, you can telephone via other providers.
Telephone numbers can be assigned to specific providers as follows:
– You can automatically assign a provider to a prefix or telephone number (see ”Programming
provider preselection”, Page 35).
– You can assign a card entry to a fixed provider (see ”Setting up the card file”, Page 18).
This option is given priority over the above-mentioned provider preselection. This means that the
settings made here are executed even if they contradict the ”Automatic provider preselection”
settings.
– If necessary, you can assign providers and telephone numbers or card file entries on an individu-
al basis (see ”Call-by-call provider selection”, Page 36). This option is given priority over the
above-mentioned options. This means that the settings defined here are executed even if they
contradict settings in the above options.
To utilise this option you must pre-program the selected providers in your Eurit 40:
Programming providers
You can pre-program up to seven providers:
KK
E
Go to the
Functions/providers
menu.
KK
E
Press the Display key at
Change provider
.
KK
E
Press the Display key at
1
(for example) to program a provider.
E
Enter the provider name.
E
Enter the provider code.
To define the provider as a VIP entry (see ”Dialling from the VIP directory”, Page 22):
KK
E
Press the Display key at
VIP
.
KK
E
Press the Display key repeatedly at
line
until the desired number is
displayed.
KK
E
Save.
G
You must enter at least one character for the name, otherwise the provider cannot be programmed.
Q
W
E
A
S
D
I ?
s h i f t
d e l
Y
X
E
X
Other functions and facilities
34
