Asante IntraCore 6524, User Manual

Page: 17 / 150

Page 2-1
2
Installation and Setup
This chapter explains how to install, connect, and configure the IntraCore 6524
chassis and modules to work with your network. It also explains how to set up
your IntraCore 6524 for management, either from a console, via telnet, via
SNMP, or by using a Web browser.
Installation Guidelines
The following guidelines will help you prepare to install your IntraCore 6524 in
such a way that it has the proper power supply and environment.
Power Requirements
The source electrical outlet should be installed near the IntraCore 6524 and
easily accessible. It must also be properly grounded.
Make sure the power source adheres to the following guidelines:
❑
Input voltage range: 90 to 254 VAC
❑
Frequency range: 47/63 Hz
❑
Maximum input AC Current: 2.0A at 115 VAC full load
Environmental Requirements
The IntraCore 6524 must be installed in a clean, dry, dust-free area with
adequate air circulation to maintain the following environmental limits:
❑
Operating Temperature: 0° to 40° C (32° to 104° F)
❑
Storage Temperature: -40° to 70° C (-40° to 158° F)
❑
Relative Humidity: 8% to 90% non-condensing
❑
Sortgage RH: 0% to 95% non-condensing
❑
Storage Temperature: 5% to 85% non-condensing
Avoid direct sunlight, heat sources, or areas with high levels of electromagnetic
interference.