Asante IntraCore 6524, User Manual

Page: 59 / 150

Unicast Forwarding Database Configuration
Page 3-31
Current Settings
Table 3-9 explains each setting on the Forwarding Database Configuration
Menu.
Table 3-9 Forwarding Database Configuration Menu settings
Displaying the Forwarding Database
Use the following procedure to view the Unicast Forwarding Database table.
1
Open the Unicast Forwarding Database Configuration
Menu by typing d in the Configuration Menu.
2
Type either a, p, or v, depending on the range of MAC
addresses you want to view.
Type a to display the MAC addresses learned on all ports on
the IntraCore 6524.
Type p to specify a port, then see the MAC addresses for
that port only.
Type v to specify a VLAN, then see the MAC addresses for
the member ports of that VLAN only.
3
At the prompt which appears, type y to see IP addresses in
the display or type n to see the display without IP addresses,
then press Return. The selected display appears.
Figure 3-14 shows an example of the Unicast Forwarding Database table for all
ports, without the IP displayed.
Setting Description
Age-out Time The number of seconds that addresses are retained in the table.
The default is 300 seconds. The range is from 10 to 1,000,000.
MAC Address Count The number of entries currently in the MAC Address Table.
IP Address Count The number of entries in the MAC Address Table that contain a
corresponding IP address.