Asante IntraCore 6524, User Manual

Page: 60 / 150

Configuration
Page 3-32
The Type field refers to the type of MAC address. The Type setting may be:
❑
S — static (set by management, and will not age out)
❑
D — dynamic (learned by the switch; will be aged out)
❑
M — multiple (associated with multiple IP addresses, as in the case
of a router)
❑
I — Self (the MAC address of the IntraCore 6524)
Figure 3-14 Unicast Forwarding Database, all ports, without IP displayed
Searching for a MAC Address
The Unicast Forwarding Database can be searched by MAC address or by IP
address. To search for a specific MAC or IP address, use the following
procedure:
1
Access the Unicast Forwarding Database Configuration
Menu by typing d in the Configuration Menu.
2
Type m to search for a MAC address.
Type i to search for an IP address.
3
Type the MAC or IP address at the prompt.
4
Press Return.
If the address is located, it is displayed, with its associated information, as
shown in Figure 3-15. If the address is not located, a message appears, stating
this.
Entry Type : ( D = Dynamic , S = Static , I = Self )
+------+----+----+-----------------+---------+
|Module|Port|Type| MAC Address | VLAN ID |
+------+----+----+-----------------+---------+
1 2 S 00:00:94:75:2A:21 0001
1 6 D 00:00:94:9A:BF:54 0001
1 6 D 00:00:94:B4:66:48 0001
1 6 D 00:00:94:B4:7A:8D 0001
1 6 D 00:00:94:B5:1B:B1 0001
- -- I 00:00:94:DD:75:01 0001
1 11 D 00:10:4B:36:91:AC 0001
End of Summary, Quit