Asante IntraCore 6524, User Manual

Page: 92 / 150

Advanced Management
Page 4-12
Figure 4-4 Duplicated IP address list
Enabling and Disabling Station Movement Trap
The station movement trap security measure ensures that when any end station
is moved from one switch port to another, an alert is sent to the designated trap
receiver. Station movement is detected when a station’s MAC address (already
learned by the switch) appears on a different switch port. The station movement
trap includes the station’s MAC address and IP address (if available) and the
switch’s port numbers.
By default, station movement trap is disabled.
To enable or disable detection of the movement of a station on the IntraCore
6524:
1
From the Configuration Menu, type t to access the Security
Management Menu.
2
Type s to toggle station movement trap.
Configuring Port Security
To access the Port Security Configuration Menu, type t in the Configuration
Menu to access the Security Management Menu, then type p to access the Port
Security Configuration Menu. A screen similar to Figure 4-5 appears.
+---------------+--------------------+-+---------------------+-+
| IP Address | Owner MAC |P| Spoofer MAC |P|
+---------------+--------------------+-+---------------------+-+
192.203.54.222 00:00:94:00:00:01 1 00:00:94:00:00:02 2
192.203.54.223 00:00:94:00:00:04 3 00:00:94:00:00:02 2
192.203.54.224 00:00:94:00:00:05 4 00:00:94:00:00:02 2
End of Summary, Quit.