Asante IntraCore 6524, User Manual

Page: 97 / 150

Security Management
Page 4-17
Inserting/Modifying a Port Trusted MAC Address
When you set port security level 2 or 3 for a port, you specify the port-trusted
MAC address. You can change that address for a port without completing all
the steps to set the port security.
To add or change the port-trusted MAC address:
1
From the Configuration Menu, type t to access the Security
Management Menu.
2
Type p to access the Port Security Configuration Menu, as
shown in Figure 4-5.
3
Type i, then follow the instructions on the screen.
Resetting Security to Defaults
To reset the security measures on the IntraCore 6524 to the factory defaults,
access the Security Management Menu by typing t in the Configuration Menu.
Then type r to reset all of the security configurations that have been changed
back to the factory-set defaults. These defaults and their meanings are discussed
in the sections on each security measure, earlier in this chapter.