Asante IntraCore 6524, User Manual

Page: 57 / 150

Global Port Configuration
Page 3-29
4
Type i to set the priority for the selected port.
5
Enter the priority, from 0 to 7, and press Return.
The new default priority is shown on the Advanced Port Configuration Menu.
Global Port Configuration
The Global Port Configuration Menu allows you to simultaneously change the
configuration information for all ports in a module.
To change the port configuration for all ports in a module, use the following
procedure:
1
From the Configuration Menu, type p to access the Port
Configuration Menu.
2
From the Basic Port Configuration Menu, type g. The
Global Port Configuration Menu appears, as shown in
Figure 3-12.
Figure 3-12 Global Port Configuration Menu
Follow the procedures in the following sections: “Port Configuration” on
page 3-20 and “Advanced Port Configuration” on page 3-26.
IntraCore 6524 Global Port Configuration Menu Module: [1] Port: [01]
Operating Status: +------- -------- -------- --
Auto Negotiation: ******** ******** ******** **
Speed/Duplex: Hhhhhhhh hhhhhhhh hhhhhhhh hh
Flow Ctrl: *------- -------- -------- --
Class of Service: -******* ******** ******** **
Priority: 00000000 00000000 00000000 00
<Cmd> <Description>
h Help for legends
t Select Global Ports Status Enable/Disable
u Select Global Auto-Negotiation/Manual
l Select Global 10M/100M bps Link Speed
d Select Global Half/Full Duplex
o Modify Global Auto-Negotiation Advertisement
f Toggle Global 802.3x Flow Control Enable/Disable
i Set Global Port Devault Priority
q Return to Previous Menu
Command>