Asante IntraCore 6524, User Manual

Page: 112 / 150

Advanced Management
Page 4-32
Current Settings
Table 4-8 describes each setting on the GVRP Port Configuration Menu screen.
Table 4-8 VLAN Port Configuration Settings
Setting the Port VLAN ID
Port VLAN ID (PVID) is used for VLAN classification of incoming untagged
frames and has meaning only when a port is configured to receive both
untagged and tagged frames. It is used to assign untagged frames to the VLAN
identified by the PVID.
By default, each port on the switch has a PVID of 1 (the default VLAN). The
allowed PVID range is 1 to 4094. For ports that are configured to receive only
tagged frames, the PVID is meaningless and the port is assigned a PVID
of 4095.
For ports that are members of more than one VLAN, received frames are
assigned as follows:
❑
A tagged frame is forwarded to the VLAN matching the VID in the
tag field of the frame
❑
An untagged frame is forwarded to the VLAN matching the PVID
To set the VLAN ID for the port, from the VLAN Port Configuration Menu,
type i. Follow the instructions on the screen.
Setting Description
Module The IntraCore 6524 module for which the information on the
screen applies. (Always module 1.)
Port The port for which the information on the screen applies.
Port VLAN Member-
ship Info Shows each VLAN index’s current membership status for this
port.
Port VLAN ID (PVID) This port’s VLAN ID.
Port Frame Type Whether the port currently receives all frames (tagged and
untagged) or only 802.1Q tagged frames.
Gvrp Failed Reg. Count The number of times the system has failed to dynamically register
a VLAN. Failure usually indicates the maximum number of
VLANS has been reached.
Port Ingress Filtering Whether ingress filtering is currently enabled or disabled on this
port.