VLAN Button
Page 5-13
VLAN Button
This button opens the VLAN Groups page, as shown in Figure 5-12. The page
shows the modules of the IntraCore 6524, and the ports that are assigned to the
currently selected VLAN. For information about VLANs, see Chapter 4.
In the VLAN Groups page, there is also a panel that shows the VID of each
VLAN on the current switch. To select a VLAN, click the appropriate VID.
Figure 5-12 VLAN Groups page
To configure the selected VLAN, click the
VLAN
button. To configure the
ports for the selected VLAN, click the
Ports
button.
Port Configuration
Clicking the
Ports
button in the VLAN Groups page opens the VLAN Port
Selection page, as shown in Figure 5-13. The page shows the modules of the
IntraCore 6524. There is also a panel indicating the current Port VLAN ID and
its settings.
To see and modify the settings for a port, click on the connector for it in the
module simulation. Then make the appropriate settings in the right-hand panel
of the page.
Summary of Contents for IntraCore 6524
