![background image](http://html1.mh-extra.com/html/asaklitt/31-9779/31-9779_instruction-manual_2980278022.webp)
22
E
ngl
is
h
Instructions for use
Cycling
Important:
• Prepare the electric bicycle in accordance with
the
Preparing for your first bike ride
and
Checks to be
performed before every ride
sections.
• Prepare yourself by reading and understanding
the instruction manual.
Battery
Important:
• The battery should be fully charged before you use
the electric bicycle.
• If the battery should emit any unusual sounds, have
an abnormal temperature, or leak, you must stop using
it or cease the charging process immediately.
• The optimal charging temperature is 20 °C. Do not
charge the battery in temperatures below 0 °C or
above 40 °C.
• If the bicycle is not used for an extended period,
the battery must be charged every third month to
maintain the battery capacity.
Information
• Both the battery and the charger are fitted with
a heat sensor, which automatically ensures that
charging is ceased if the temperature should become
abnormally high.
• The battery charger automatically stops charging after
8 hours.
Removing the battery from
the battery compartment
Inserting the battery into the battery
compartment
1. Push the catch downwards and remove
the battery cover.
2. Unlock the battery lock with the key.
3. Pull the lower part of the battery outwards and
the 3-part battery will slide out of the battery
compartment.
1. Slide the upper part of the battery into the opening of
the battery compartment.
2. Insert the entire battery and push the lower part in so
that the battery clicks into place in the battery locking
mechanism.
3. Refit the battery cover.
4. Remove the key.
Checking the charging status of the battery
Turn on the electrical
system and check
the bars (C11) on
the display. When 5 bars
are shown, the battery is
fully charged.
Charging
The battery can be charged either in the battery
compartment on the bicycle or when it has been removed.
1. Press down [ ] for >
6 seconds to turn off
the electrical system.
2. Plug the battery charger into a wall socket, and
connect the charger to the battery.
-
The red LED lamp on the battery charger indicates
that the battery is being charged.
-
The green LED lamp on the battery charger is lit
when the battery is fully charged. It takes about
6–8 hours to charge the battery to its full capacity.
3. Remove the plug from the wall, and disconnect
the charging contact from the battery.
Summary of Contents for 31-9779
Page 2: ......