6 Operation on an ADSL Access
48
ARGUS 145
PLUS
VLAN
Use
VLAN:
Specifies whether or not VLAN should be used:
yes or no.
Default setting:
No
ID:
Identifier for the VLAN to which the frame belongs.
Every VLAN is assigned a unique number, the VLAN
ID. A device, which belongs to the VLAN with the ID =
1, can communicate with every other device in the
same VLAN, but not with a device in other VLANs (one
with an ID other than 1, i.e. 2).
Range: from 0 to 4095
Default:
0
Priority:
User - priority information
An eight-level (3 bits) priority can be assigned to each
frame.
In this manner, it is possible e.g. to give priority to
forwarding voice data (e.g. in the case of VoIP), while
HTTP data will be handled as a lower priority.
Range: 0 to 7
Default:
0
PPP:
PPP (Point- to-Point Protocol) settings
User name
Entry of the user name assigned (by the
network operator)
Use the keypad to enter the user name.
When the right softkey is pressed it assumes
a different meaning and thus influences the
entries made from the keypad (letters or
digits):
Password
Entry of the password assigned by the network operator:
For instructions, see User name
Set the IP
If “Yes”, the IP address entered as own IP address (see page 49) will be
used for the connection.
Default setting:
No
