manualshive.com logo in svg

Argus 145 Plus, Manual

Share
Download
Argus 145 Plus Manual Download Page 310

14 Operation on an ISDN Access

310

ARGUS 145

 PLUS

14.17.4 Time measuring

B-channel delay

The ARGUS setups a leased line to a remote loopbox and measures the propagation delay 

for the data in the selected B-channel. If the ARGUS does not receive the data back in the 

B-channel in about 13 seconds, it will display the message “No loop”. 

The measurement (continuous measurement) must be terminated manually.

The ARGUS - Main menu










Enter the B-channel from the keypad (first 
press 

<Del.>

) or use the cursor keys to 

set the B-channel.

Perform measurement

Display:

The measurement will be repeated in 
cycles (continuous measurement).

avg:

average B-channel delay

min:

shortest B-channel delay

max:

longest B-channel delay

bit:

The average B-channel delay in bits 
(multiples of the time required to 
send a bit at 64 kbit/s, it takes 15.26 
µsec to send a bit).

Terminates the measurement 

and displays the results of the last 
measurement

Single Tests

Time measuring

B-channel select

B-channel delay

Summary of Contents for 145 Plus










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands