Argus 145 Plus Manual Download Page 148

Page: 148 / 361

9 Operation on an Ethernet Access

148

ARGUS 145

PLUS

Setup the Ethernet connection.

Display:

- Edit the preset profile (such as, Profile 1).

- Protocol from the default profile






The Ethernet test is not yet started!

Key to the LED symbolized in the display:

Red LED

no test started

Yellow LED

test started

Green LED

A connection has been setup.



<Menu>

Open the Main menu.

<Profile>

Display the profile, see
page 149

<Start>

Activate Ethernet.




<Stop>

Disable the Ethernet
connection.

Display:

Current connection status

Time elapsed since the start
of the activation in h:min:sec.



<Stat.>

Open the statistics

Continuation on

Summary of Contents for 145 Plus










































































































































































































































































































































































Search results

Summary of Contents for 145 Plus

Reviews:

Related manuals for 145 Plus

Brands by name

Popular brands

Argus 145 Plus, Manual

Search results

Summary of Contents for 145 Plus

Reviews:

Related manuals for 145 Plus

Brands by name

Popular brands