Argus 145 Plus Manual Download Page 98

Page: 98 / 361

7 Operation on a VDSL Access

ARGUS 145

PLUS

7.4 The ARGUS in the VTU-R Bridge Access Mode

Connect the ARGUS to the VDSL access using the xDSL cable and to the PC with a patch

cable.



In bridge mode, the ARGUS acts like an VDSL modem, i.e. the ARGUS passively passes

all packets from the Ethernet side to the VDSL access (and vice versa). In this case, the

PC is responsible for setting up the connection.



7.4.1 Setting the access mode to VTU-R bridge

The ARGUS - Main menu



Patch cable

xDSL cable

LAN jack

Line jack

Ethernet

VDSL



Access

Protocol e.g. PPPoE

Access

VDSL

Continuation on next page

Summary of Contents for 145 Plus










































































































































































































































































































































































Search results

Summary of Contents for 145 Plus

Reviews:

Brands by name

Popular brands

Argus 145 Plus, Manual

Search results

Summary of Contents for 145 Plus

Reviews:

Brands by name

Popular brands